DIY Summer Wreath

It's been a minute since I shared a DIY tutorial, and this one is super duper easy!  I wanted to add a splash of color to my already colorful door, so I whipped up a pair of summery wreaths.  They have lots of lovely pre-made options at Michaels, problem is they are so pricey!  I jumped on the silk flowers when they had a big sale a few weeks back, (don't worry they have sales often) I put together this pair of wreaths in about an hour and spent about $35.  You can see below that I arranged the flowers in a ombre pattern, cut the stems and began gluing.  Once I created the fist one, I did the second as mirror image.  And that's it!!  

DIY summer wreath
DIY Spring Wreath
DIY Spring Wreath Supplies
DIY Spring Wreath Supplies



DIY Mantel

DIY Mantel

When we moved into our house last October, I knew I had to install a mantel on our fireplace in time to decorate it for the holidays.  I built a simple box mantel from wood boards and share how to build and install it below.  Unfortunately our chimney inspector informed us it was too close to the wood burning stove.  I kept it up for the holidays, but sadly removed last January.  I annoying reinstalled it above the vents a few weeks back.  Then I decked it out for the holidays!  

Keep reading to see how to install your own box mantel.  

Read More

Ikea Hack // Fauxdenza Entertainment Center

I know I know this isn't a unique project, but it's one I've wanted to do for so long!  Many of the other media stations I actually liked were upwards of $1000, and this DIY cost about $300.  I love the clean look of the streamlined entertainment center.  Most of the other tutorials I found don't go the extra step and finish trimming off the bottom of the piece with a wood panel, but I really think it looks much more finished when framed out entirely.  Hope you're inspired to make an Ikea run this weekend!! 

FAUXDENZA.jpg
DIY Ikea faudenza
Ikea Hack fauxdenza
Ikea Fauxdenza

Supplies:

Tools:

Step 1: Assemble the cabinets.

Step 2. cut a hole in the back of the cabinet for the outlet.

Step 3. Hang cabinets.  This step, I actually had help with, my father-in-law lent a hand in following the Ikea directions and installing.

DIY fauxdenza

Step 4. prepare the trim of the fauxdenza. I had them cut the plywood for me at Home Depot.  Four pieces:

  1. Top - the length of the cabinets plus 1 5/8" to cover the side panels, and depth of the cabinets, with doors, plus about 1/4" - (for ours 91 5/8" x 15 3/8")

  2. Bottom - the length of the cabinets plus 1 5/8" to cover the side panels, and depth of the cabinets without the doors, MINUS about 1" to leave room for cords.  Note - the bottom panel cannot be under doors, or you will not be able to open - (for ours 91 5/8" x 14")

  3. Sides, cut 2 - depth of the cabinets with doors plus 1/2" (same as top piece), height of cabinets - (for ours 20" x 15 3/8")

Step 4: Follow the instructions to add the plywood edge tape on three sides for the top and bottom panels and just one long side on each of the side panels.

Step 5. Sand and stain the trim. 

Favorite stain color

Step 6. install the trim.  Start with the side panels, use wood glue and the brad nailer to attach to sides of cabinets.  Line up with top and front of cabinet. 

Next install the top panel, and secure in place with wood glue and the brad nailer.  Line up with front of cabinet and edge of side panels.

 Finally grab a partner to hold the bottom panel in place and generously use the brad nailer to secure.  Line up with side panels and cabinet body (not doors).

Step 7. Drill a hole in the top of the cabinet with 1 1/2" bit, for the wires to feed through.  

Step 8. Style and enjoy!